![]() |
Two Crows (click to enlarge) Olympus E-M1 Mark II; 12-100mm f/4 PRO lens @ 92mm; 1/640th sec. @ f/5.6; ISO 200 From an in-camera JPEG set to Olympus' Monochrome setting. |
My little experiment showed me that every one of the images were as editable and looked as good as what I would have had with my RAW images. In my opinion, the JPEGs produced by my Fujifilm and Olympus cameras are so good that they can be utilized for most all of my photography, according to my tests. In fact, I like the in-camera sharpening of my Fujifilm JPEGs better than sharpening in LR. But JPEGs won't work well in "all" cases.
One of my tests that I didn't show was of some experimental images I made through a window (looking north) showing the dark inside my home (no lights burning) and simultaneously outside on a bright sunny day. I wanted to see what the difference in dynamic range was between RAW and JPEG in the same, really high contrast images. The JPEGs almost did as well as the RAWs. Not quite. Those really high contrast situations are when you need as much dynamic range as you can get and you should choose RAW in those kinds of circumstances. However, even the RAW images didn't do so well. I did the experiment with my Fujifilm X-T3 but I'm not sure even a Sony A7III with a couple more stops of dynamic range would have been able to handle that level of brightness difference in one exposure. In either case, my normal procedure in a situation like this would have been to invoke automatic bracketing, fire off three quick shots 2 stops apart, then switch the camera back to normal operating mode. It only takes a second to do so. I would then have blended the three exposures in LR, regardless of RAW or JPEG.
Try shooting JPEGs sometime. You may be surprised. This was just a little exercise for better understanding.
Join me over at Instagram @dennisamook or my website, www.dennismook.com.
Thanks for looking. Enjoy!
Dennis A. Mook
All content on this blog is © 2013-2019 Dennis A. Mook. All Rights Reserved. Feel free to point to this blog from your website with full attribution. Permission may be granted for commercial use. Please contact Mr. Mook to discuss permission to reproduce the blog posts and/or images.
If you get a good quality image that you can work with it would be very hard to tell it was only a jpeg all along unless you viewed it very large. Just my opinion on it.
ReplyDeleteShelly, thanks for the comment. I think, even when printed very large, any differences between the two would be hard to spot unless the image was made at very high ISO, very low light or extreme contrast. JPEGs today are excellent!
Delete